KE2 Wire Harness
(Accessory for the KE2 Evaporator Efficiency, KE2 Controlled Environment, KE2 Adaptive Control and KE2 LowTemp + Defrost controllers)
Speeds installation by eliminating on site preparation of wires, labeling, and additionally reduces the need to stock multiple colors and gauges of wires.
Features
- All wires are different colors and each is matched by gauge and connector for the input on the KE2 Evap.
- Stranded wires are flexible, making cable easier to pull and route.
- Cable ties at each end prevent wires from tangling.
- The wires measure 10′, 25′ or 40′ from cable tie to cable tie, with overall length approximately one more foot.
On February 20th the National Restaurant Association released the list of products honored as Kitchen Innovations 2013...
Washington, Missouri – KE2 Therm Solutions, Inc. was recognized for excellence in product design in the 10th annual Dealer Design Awa...
KE2 Therm Products
- KE2 Service Tool App
- KE2 Humidity Control
- KE2 Evap Panel
- KE2-EM Plus
- KE2 Evap OEM
- KE2 Combo Display
- KE2 Compressor Sequencer OEM
- KE2 Compressor Sequencer – Discontinued
- KE2 Wireless Sensors
- KE2 Edge Managers (KE2-EMs)
- KE2 Condenser Fan Control
- KE2 Evaporator Efficiency
- KE2 Temp + Air Defrost
- KE2 Evap for Rack Efficiency
- KE2 Low Temp + Defrost
- KE2 Controlled Environment
- KE2 Evap-RE2
- KE2 Adaptive Control
- KE2 Simple Superheat – Discontinued
- KE2 Temp + Valve Control
- KE2 Simple Interface Board – Discontinued
- KE2 Fan Control
- KE2 RSV Electric Expansion Valves
- KE2 SmartAccess
- KE2 Local Area Dashboard & Alarms (KE2 LDA) – Discontinued
- KE2 Flash Drive – Discontinued
- KE2 WiFi Service Tool – Discontinued
- KE2 Smart Gate
- KE2 Wire Harness